ROCO electricity meter in schuko intermediate cable

Roller counter: MID calibrated and sealed, only use roller counters that have been calibrated according to the specifications of the calibration supervisory authority.

• Accuracy class 1 / B. The housing is made of very strong special plastic.
• Integrated electricity meter, MID calibrated and sealed.
• The counter cannot be reset.

Easy setup
To record the measured values ​​correctly, place the electricity meter between the power supply and the consumer device.
Electricity metering begins as soon as the consumer device is turned on.
Includes a sturdy strap for hanging.

Power consumption at home, e.g. in the garage
Avoid unpleasant surprises with your electricity bill, monitor your power consumption at all times with a ROCO energy meter.
Simply connect the energy meter between the socket and, for example, the freezer, so you can check the meter reading at any time.


1. Schuko plug 230V / 16A / male for power supply 1.5 m H07BQ-F 3G2.5 blue polyurethane cable
2. ROCO electric meter in between ( "powerlight" voltage indicator )
3. Schuko socket, 230V / 16A / female for power supply 1.5m H07BQ-F 3G2.5 blue polyurethane cable

• ROCO electricity meter, 1-phase
• 230 V 50 Hz / 16 A / maximum 3500W
• Analog display 5 + 1 digits,
• Readable at any time
• Display max. 99,999.9 kWh
• MID calibrated 2014/32/EU
• Accuracy class 1 / B
• Operating temperature -25°C to +55°C

IP44: foreign objects and splash-proof
( IP44 outdoor: For outdoor use, it is recommended to use a protection class of IP44 or higher. The first number "4" means that the product is protected against the ingress of solid foreign objects larger than 1 mm. The second number "4" indicates that the product is sufficiently sealed and therefore protected against splashes from all sides. )

Safety:
Tested according to the following standards

• DIN EN 50525-2
• DIN VDE 0620-1
• IEC 60309
• IEC EN 50470-1

For example, other uses:
Electricity consumption during building renovation The landlord is obliged to cover operating costs incurred during renovation work.
Use ROCO electricity meters during building renovations to deduct the electricity consumed from the tenant's general bill.

Invoicing in the event of damage
In the event of insurance, e.g. damage caused by force majeure, such as flooding, Roco electricity meters are used for electricity billing.
Among other things, the operating costs of a dryer can be determined using an electricity meter.
Insurance covers these costs.

Electricity bill?
It's easy with ROCO and MIXO energy meters!
According to Section 31 of the German Measurement and Calibration Act (MessEG), only meters that comply with calibration regulations may be used for energy and electricity billing.
ROCO and MIXO energy meters comply with the European Measuring Instruments Directive (MID) and are approved for electricity billing.
The use of uncalibrated electricity meters for billing is an administrative offence punishable by a fine of up to 50,000 euros (Section 60) (in Germany).