Combi 4e, iNet X panel heating and hot water for small and medium-sized vehicles

Combi 4e heats the vehicle and heats water with one device.

Combi 4 E combines all the advantages of Combi 4 and an electric heater.
Unlike the Combi 4, it also has integrated electric heating elements.
The heater operates on gas for self-sufficient use, on electricity at the campsite and in mixed mode at low outdoor temperatures.
Combi 4 E is an air heater with an integrated water heater.
They allow the heating to operate in gas, electric or mixed mode.

• Heat Hybrid : more savings with quiet, emission-free electrical energy thanks to integrated heating elements for your daily heating and hot water needs
• Flexible: Combi E versions can be operated with gas, electricity or a combination of both
• Efficient: High efficiency with low consumption
• More economical: very low battery power consumption and lower gas consumption thanks to more efficient combustion
• Individual: Heat quickly or adjust the temperature continuously as needed.
• When the boiler is full, the water is heated immediately. In summer, you can also just heat the water without heating.
• Self-sufficient: directly mounted integrated pressure sensor automatically regulates the combustion air supply
• Quiet: The heater operates completely silently when powered by electricity
• Compact: lightweight and space-saving heater that can be flexibly installed
• Practical: Optimal distribution of warm air through four air outlets for a pleasant room climate
• Convenient: The gas version is equipped with a high-quality burner and therefore heats reliably even while driving. When you arrive at the campsite, you simply switch to electric mode and the heating operates at 230 V.

Detail:

• Automatic emptying of the water tank at low temperatures thanks to the FrostControl drain valve
• Easy control with Truma iNet X or Truma CP Plus
• Long service life thanks to efficient combustion control
• Integrated air pressure sensor automatically regulates the combustion air supply
• 10 l stainless steel water tank

Specifications:

• Gas type: LPG (propane/butane)
• Burners: 2
• Nominal thermal output (automatic power scales)
  Gas consumption Combi 4 E: 2000 W / 4000 W.
  
• Gas consumption: 160 g/h – 335 g/h
• Rated heat output mixed use: max 3800W
• Nominal heat output electric operation: 900 W / 1800 W
• Power consumption (12V)
  • Heating and water tank operation: 1.2 - 6.5 A or 1.4 - 6.5 A
  • Heating water tank: 0.5 A
• Power consumption (230 V)
  • 900W: 3.9A
  • 1800W: 7.8A
• Quiescent current: 0.001 A
• Water content: 10 liters
• Heating time (approx. 15 °C - approx. +60 °C): Water tank: approx. 23 min.
• Heating time (approx. 15 °C - approx. +60 °C): Water tank and heater: approx. 80 min
• Airflow: max 287 m³/h
• Pump pressure: max 2.8 bar
• System pressure: max 4.5 bar
• Installation dimensions (L x W x H): 540 x 500 x 350 mm

Scope of delivery:

• Heating with room temperature sensor
• Truma iNet X panel
• Control unit cable 6 m
• Fasteners

Exhaust system and water connection kit are not included.