SMART cut-off relay suitable for EURO 6

2 control methods - voltage-dependent or via motion sensor

Diodes prevent current from flowing back from the engine to the starter battery
• D+ signal is not required
• Perfect in combination with charging boosters for even more charging power
• TÜV certified

Isolation relay for connecting and disconnecting the starter battery, internal battery.
2 working modes ensure safe operation.
The relay is activated at a voltage of 13.4 volts or when the vehicle is moving.
The diode circuit prevents current from flowing back from the internal battery to the starter battery.
Power: 12 V / 120 A, short-term 180 A.
The battery connection cable must have a cross-section of at least 10 mm2.
It should be installed as close as possible to the starter battery.
Make sure it is firmly attached to the basket for the motion sensor to work properly.
Dimensions: L 45 x D 45 x 45 (83) mm.