Carbest Power Panel Flex 80W valkoinen

• Sunpower cells: a clear plus for electricity generation, even if the angle is not optimal
• Approximately 3 x lighter than conventional modules
• walkable with even bonding.
• Compact connection with pre-assembled cable (2 x 2.5 mm²)
• Compatible with Carbest or Votronic solar controllers
• Also ideal for use in marine climates.
• This solar panel must not be used with Victron controllers!

The modules produce more electricity than conventional PV modules of the same size.
Thanks to the high-quality ETFE surface, the honeycomb structure has a clear performance improvement in low light and cloudy weather.

Especially at high temperatures, the performance is significantly higher than comparable modules.
This means maximum efficiency without a break.

Panel surface layer:
ETFE: A very hard and thin (about 0.025 mm) material with a high light transmittance of about 95%.
Heat resistant up to approx. 150 °C
Very high weather resistance, including salt water.

Material carrier plate:
TPT: Material with high bending capacity.
More flexible than fiberglass.
Fiberglass: Very solid, hard material for the best possible protection of solar cells.

Things to consider during installation:
All Flex modules must be fully glued (without air pockets). All module edges up to the top layer must then be completely sealed.