Heating device and water heater.

Delivery includes heater only, no installation parts.
(control panel, cable, circulation pump, drain valve, water spindles and other installation parts must be ordered separately).

Specifications:
- Dimensions: 310 x 340 x 510 mm (hxwxd)
- Weight: 15 kg (without liquids)
- Water heater capacity: 10 l
- Power 1: 3.3 kW / 8.3 kW & gas consumption 245 g/h / 275 g/h
- Power 2: 5.5 kW / 6.4 kW & gas consumption 405 g/h / 460 g/h
- I3+ 28-30/37 mbar. I3B/P 30 mbar
- Liquid volume, glycol: 3.5 l
- Maximum pressure, glycol: 0.05 Mpa (0.5 bar)
- Maximum pressure, fresh water: 0.3 mPa (0.3 bar)
- Resistance power 230 V~: 1 × 1050 W + 1 × 2100 W
- Power consumption: 12 V DC / 1.9 A (max)

Possibility of a 2-zone system (must be supplemented with an accessory card to control multiple circulation pumps).
A simpler, more modern interface in the control panel.
Continuous hot water through a built-in heat exchanger.
Updated Alde Intelligent Climate Technology (ICT).

Advantages of a 2-zone system.

With a 2-zone system, the temperature in the bedroom area can be set lower, while the temperature in the kitchen/living area, for example, can be higher.
This is perfect for many modern campers and motorhomes where the bedroom is properly separated from the kitchen/living area.
This not only increases overall comfort, but also saves fuel (LPG or electricity).
The system is installed with separate convector circuits for each zone, where the temperature can be set individually.

For use, the following is required for installation:

Exhaust pipe
Suction and exhaust air hose
Circulation pump
Connectors
Control panel
Venting kit
Safety/drain valve