Heating element 53 cm, 5 meter roll, for underfloor heating

Pleasant warmth for your feet all year round in cool and cold weather.
Thin foil of only 0.3 mm, simple installation under carpet or floor covering.

The heating film is almost insensitive to damage.
However, if damage were to occur and you were to make a hole in the heating foil, there would only be a very small heat loss that your feet would never notice.
In addition, the film does not contain PVC or halogen.

10-year operational warranty.

For Ebeco underfloor heating installation you will need:

• - Thermal foil.
• - Transformer for power supply to foils.
• - Cable from the transformer to the foil, and for connecting the foils to each other (if there are several foils).
• - Special connectors for attaching the cable to the foil (2 pcs / mat connection).
• - Connector tool (special press) for attaching connectors.
• - Special tape to protect joints.

The table below shows the power requirement for selecting a transformer:

For example:
The power requirement of a 3 m long and 53 cm wide carpet is 127W.
In this case, the transformer product code 870123 with a maximum load of 250W is suitable for the mat.

It is possible to connect multiple mats to one transformer, taking into account the connectors and load.