Lämmönvaihdin, liitokset 22mm ja 16mm

With a heat exchanger and water-circulated central heating, the heat from the engine cooling system can also be utilized to heat the living area.

All you need to do is set the desired temperature on the room thermostat and start the heating system's circulation pump, 2755000.
The system then acts as an engine heater, as the central heating system heats the car's engine coolant. Made of stainless steel.
Connections: 22 mm for the vehicle heating system, 16 mm for the engine cooling system.
When installing a heat exchanger, you must check with the car manufacturer's representative that the procedure will not cause harm or danger to the engine.
NOTE! If the heat exchanger is placed too close to the central heating boiler, the boiler's overheating protection may trip.
In this case, to reduce the circulation, a ball valve (Figure 6 F) should be installed in the car engine system, which will reduce the temperature.

NOTE! When using fresh water in the heat exchanger, the system must be drained when there is a risk of freezing.