HEOSolution
33 products
Products» For motorhome, camper and van» Säilytys- ja lukitusturvallisuus» Pakettiautojen Merkkikohtaiset lukot» Transit»
HEOSolution Murtosuoja HeoSafe Transit 2013-2019
Availability
Approximately 10 - 16 day(s) from the order, at the earliest 15.1.2026. The reliability of the estimation is good.
Notify me when this product is in stock again
Product description
— Show original 
• Pressing and turning the knob unlocks or locks the locking system.
• The knob locks automatically when the latch is fully extended or retracted.
INSTALLATION INSTRUCTIONS:
• Before assembling, first press the rubber lip under the plastic cover on the B-pillar.
• Attach the lock to the door frame. The distance between the lock housing and the B-pillar should be approximately 3 mm.
• Place the lock, once the bolt is unscrewed, so that the bolt touches the plastic cover.
• Mark the holes only afterwards.
• Remove the lock and then pre-drill with a 3.2 mm drill bit.
• Secure the lock with the special self-drilling screws provided using a 4 mm Allen key.
IMPORTANT INSTALLATION NOTE:
Close the door slowly after installation and make sure that the HEOSafe ® lock passes "cleanly" past the rubber grommet.
Weight
2 kg
(with sales package 2,2 kg)
CommentsAdd a comment
Brand
Approximately 10 - 16 day(s) from the order, at the earliest 15.1.2026. The reliability of the estimation is good.
Notify me when this product is in stock again
Product description
— Show original Anti-theft locks for cab doors - 1 pair of locks (left and right). Installation on the inside of the door frame.
INSTRUCTIONS:• Pressing and turning the knob unlocks or locks the locking system.
• The knob locks automatically when the latch is fully extended or retracted.
INSTALLATION INSTRUCTIONS:
• Before assembling, first press the rubber lip under the plastic cover on the B-pillar.
• Attach the lock to the door frame. The distance between the lock housing and the B-pillar should be approximately 3 mm.
• Place the lock, once the bolt is unscrewed, so that the bolt touches the plastic cover.
• Mark the holes only afterwards.
• Remove the lock and then pre-drill with a 3.2 mm drill bit.
• Secure the lock with the special self-drilling screws provided using a 4 mm Allen key.
IMPORTANT INSTALLATION NOTE:
Close the door slowly after installation and make sure that the HEOSafe ® lock passes "cleanly" past the rubber grommet.
The approximate size of the packed product or the sales package is 300 x 150 x 150 mm.
Weight
2 kg
(with sales package 2,2 kg)
CommentsAdd a comment
Brand