HEOSolution
33 products
Products» For motorhome, camper and van» Säilytys- ja lukitusturvallisuus» Pakettiautojen Merkkikohtaiset lukot» Transit»
HEOSolution Murtosuoja HeoSafe Transit 2006-2014
Availability
Approximately 10 - 16 day(s) from the order, at the earliest 15.1.2026. The reliability of the estimation is good.
Notify me when this product is in stock again
Product description
— Show original 
The locking system is unlocked or locked by pushing the knob in and then turning it.
The knob locks automatically when the bolt is fully extended or retracted.
Lockable for rotary knob only: By turning the key, you block the current state of the rotary knob: unlocked or locked.
ASSEMBLY INSTRUCTIONS
Attach the lock to the door frame. The distance between the lock housing and the B-pillar should be approximately 3 mm.
Press the rubber seal between the B-pillar and the plastic cover in the latch area.
Place the lock, once the bolt is unscrewed, so that the bolt touches the plastic cover.
Only then mark the holes.
Remove the lock and then pre-drill with a 3.2 mm drill bit.
Secure the lock with the special screws provided using a 4 mm Allen key.
IMPORTANT INSTALLATION NOTE
After installation, close the door slowly and make sure that the HEOSafe ® lock passes "cleanly" past the rubber grommet.
Weight
1,09 kg
(with sales package 1,199 kg)
CommentsAdd a comment
Brand
Approximately 10 - 16 day(s) from the order, at the earliest 15.1.2026. The reliability of the estimation is good.
Notify me when this product is in stock again
Product description
— Show original Anti-theft locks for cab doors. Installation on the inside of the door frame. Supplied in pairs (left and right).
INSTRUCTIONS FOR USEThe locking system is unlocked or locked by pushing the knob in and then turning it.
The knob locks automatically when the bolt is fully extended or retracted.
Lockable for rotary knob only: By turning the key, you block the current state of the rotary knob: unlocked or locked.
ASSEMBLY INSTRUCTIONS
Attach the lock to the door frame. The distance between the lock housing and the B-pillar should be approximately 3 mm.
Press the rubber seal between the B-pillar and the plastic cover in the latch area.
Place the lock, once the bolt is unscrewed, so that the bolt touches the plastic cover.
Only then mark the holes.
Remove the lock and then pre-drill with a 3.2 mm drill bit.
Secure the lock with the special screws provided using a 4 mm Allen key.
IMPORTANT INSTALLATION NOTE
After installation, close the door slowly and make sure that the HEOSafe ® lock passes "cleanly" past the rubber grommet.
The approximate size of the packed product or the sales package is 200 x 70 x 150 mm.
Weight
1,09 kg
(with sales package 1,199 kg)
CommentsAdd a comment
Brand