Anti-theft locks for cab doors. Attached to the door handle with screws. Supplied in pairs.

• Very practical and discreet door lock
• Quick installation on the door handle in locked or unlocked mode
• Handle for locking or unlocking the door
• Very durable (die-cast aluminum)
• Grease-free mechanism thanks to Gliss-Coat coating, completely maintenance-free
• No additional drilling or screw connections

Instructions for use:

• Press the knob and then turn it
• Turn the knob to lock or unlock the door
• The rotary knob then pops out of the way and locks again.
• Lockable for rotary knob only: Rotary knob locks with key

Assembly instructions:

• Use a Torx tool (TX30) to tighten and loosen the screws
• Push the lock between the door handle and the door
• then retighten all screws
• attach stickers
• Important installation instructions (HEOSafe Fiat Ducato 230 / 244)

After installation, close the door slowly and make sure that the HEOSafe lock passes the "clean" rubber grommet. If the distance is very small or the rubber seal even points inwards, the rubber seal may be damaged by getting between the lock and the door frame (B-pillar). This should be avoided and the following measures should be taken:
Check that the gasket is properly seated.
Once the seal is installed correctly, pull the seal away from the frame and bend the edge of the metal plate in the area of ​​the lock with pliers. This will move the seal inwards and prevent further damage.
If the latch cannot be closed or the distance between the latch and the B-pillar is too great, the door must be adjusted correctly.