Anti-theft locks on the cab doors.

Installation on the inside of the door frame. Supplied in pairs (left and right).
USER INSTRUCTIONS

• The locking system is unlocked or locked by pressing and turning the knob.
• The knob locks automatically as soon as the bolt is fully extended or retracted.
• Lockable for rotary knob only: By turning the key, you block the current state of the knob: unlocked or locked.

• Attach the lock to the door frame. The distance between the lock body and the B-pillar should be approximately 3 mm.
• Press the rubber seal between the B-pillar and the plastic cover in the latch area.
• With the bolt turned, position the lock so that the bolt touches the plastic cover.
• Only then mark the holes.
• Remove the lock and then pre-drill with a 3.2 mm drill bit.
• Attach the lock with the supplied sheet metal screws using a 4 mm Allen key.

• After installation, close the door slowly and make sure that the HEOSafe ® lock passes through the rubber seal "cleanly".