Anti-theft locks for cab doors - 1 pair of locks (left and right). Installation on the inside of the door frame.

INSTRUCTIONS:
• Pressing and turning the knob unlocks or locks the locking system.
• The knob locks automatically when the latch is fully extended or retracted.

INSTALLATION INSTRUCTIONS:
• Before assembling, first press the rubber lip under the plastic cover on the B-pillar.
• Attach the lock to the door frame. The distance between the lock housing and the B-pillar should be approximately 3 mm.
• Place the lock, once the bolt is unscrewed, so that the bolt touches the plastic cover.
• Mark the holes only afterwards.
• Remove the lock and then pre-drill with a 3.2 mm drill bit.
• Secure the lock with the special self-drilling screws provided using a 4 mm Allen key.

IMPORTANT INSTALLATION NOTE:
Close the door slowly after installation and make sure that the HEOSafe ® lock passes "cleanly" past the rubber grommet.